Hardwood Floor Refinishing in Henderson, NV | Floors Henderson

Hardwood Floor Refinishing in Henderson - Free Estimate, Written Price Up Front

Professional hardwood floor refinishing services in Henderson, NV. Licensed & insured. Free written estimates, scheduled to suit you.

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

HardwoodHardwood
Engineered hardwoodEngineered hardwood
Luxury vinyl plankLuxury vinyl plank
LaminateLaminate
Porcelain tilePorcelain tile
CarpetCarpet
ShawShaw
MohawkMohawk
COREtecCOREtec
PergoPergo
Every visit starts with

Free in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side

Get your free estimate

Trusted Hardwood Floor Refinishing for Henderson Homeowners

If your wood floors have gone gray along the traffic paths, show dents under the dining chairs, or carry a finish that scuffs every time you move furniture, you don’t need new floors. You need them refinished. Hardwood floor refinishing in Henderson typically runs $1675 – $4650 for a 500 to 800 square foot project, and that price restores the wood you already have instead of covering it up. Our technicians have up to 10 years of experience with sanding, staining, and recoating, and they work on solid and engineered hardwood alike. We start every job with a free in-home measure and estimate, so you get a written price before anything gets booked. Call (844) 972-2185. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 972-2185

Key Takeaways

  • Refinishing costs far less than replacement because you keep the existing wood.
  • Typical estimated range in Henderson is $1675 – $4650 for a 500 to 800 square foot project.
  • Refinishing starts from about $3 per square foot; the written estimate sets the final price.
  • Not every floor can be sanded down again, so we check wood thickness and condition at the estimate visit.

What Our Hardwood Floor Refinishing Service Includes

Refinishing covers a lot of ground, and the right approach depends on what your floor looks like and how much finish is left on it. Here’s what each part of the service involves and when it makes sense.

Hardwood Floor Sanding

Sanding removes the old finish and levels the surface of the wood so a new coat bonds evenly. You need it when the finish is worn through in spots, when there are deep scratches, or when the floor has been recoated so many times that a new coat won’t sit right. We use dust-controlled sanding equipment and work through progressively finer passes so the grain comes up clean and ready. How far down we can sand depends on the thickness of the wood, and we check that at the estimate before promising anything.

Hardwood Floor Sanding

Hardwood Floor Staining

Staining changes the color of the wood, either to refresh a faded floor or to shift the tone toward something that fits a room’s design. You’d ask for it when your floor is orange-toned and you want something cooler, or when sanding has left the wood looking paler than the rest of the house. We apply stain samples on your actual floor so you can see the color in your own light, and we talk through how your wood species takes stain before committing. Final color depends on the wood itself; a sample shows you what to expect, not a guaranteed match.

Hardwood Floor Staining

Hardwood Floor Restoration

Restoration is for floors that need more than a fresh coat: water-damaged boards, gaps between planks, squeaks, or wood that has cupped over time. You want it when the floor still has life in it but isn’t just scuffed. We assess the damage at the estimate and explain what refinishing can fix and what needs board replacement first. Restoring what you have is often the more sensible move than tearing out original wood that has real character.

Hardwood Floor Restoration

Hardwood Floor Buffing

Buffing is a light surface treatment that scuffs up the top layer of finish to remove dullness and minor marks. It’s a good fit when the finish is intact but looks tired, and you don’t want to sand the whole floor. We screen the surface and apply a fresh coat so the floor reads cleaner without a full refinish. It’s a smaller job, and it’s priced smaller too.

Screen and Recoat Hardwood Floors

A screen and recoat is the middle ground between a buff and a full sand: we lightly abrade the finish, clean the floor, and apply a new topcoat. You’d want it when the finish is intact but scratched on the surface and the wood underneath hasn’t gone bare. It adds a protective layer back onto the floor without going down to raw wood. Not every finish can be recoated this way, so we check what’s on the floor at the estimate.

Stair Refinishing

Stairs take more wear than any floor in the house, and they need to match whatever happens on the floor above and below. You need stair refinishing when treads are worn down the middle or the finish is chipping at the edges. We sand and refinish treads, risers, and handrails together with the floor so the whole run reads as one continuous piece. Stair work is a separate line on the estimate because the labor is different from a flat floor.

Ready for a free estimate?Call for a no-obligation estimate from a local pro.

Call (844) 972-2185

Explore

Styles & brands we work with

  • Hardwood
  • Engineered hardwood
  • Luxury vinyl plank
  • Laminate
  • Porcelain tile
  • Carpet
  • Shaw
  • Mohawk
  • COREtec
  • Pergo

Brands We Service for Hardwood Floor Refinishing

Most homeowners don’t know what brand of flooring is on their floor; a lot of the wood in Henderson homes came with the house. That’s fine with us. We install and service the floor you choose, and we refinish solid and engineered wood regardless of who manufactured it. With Shaw and Mohawk lines, the engineered and solid products are widely used across the valley, and we know how the wear layers and finishes on those panels respond to sanding versus a screen and recoat. Getting that call right protects the floor rather than burning through it.

We also work on COREtec and Pergo products when a customer is pairing a refinish in one room with a new floor in another, and we’re glad to talk through how a refinish upstairs will sit next to a new surface downstairs. Whether you have Shaw, Mohawk, or any other make, we can help – the first step is a free estimate where we look at the actual floor and tell you what it will take.

Signs You Need Hardwood Floor Refinishing Right Now

  • Gray or worn traffic paths. The finish has rubbed off where you walk most, and bare wood is showing through. Once the wood itself is exposed to foot traffic, it picks up dirt and scratches faster, so the sooner it’s refinished the less wood you lose.
  • Deep scratches that catch a fingernail. Surface marks are cosmetic, but scratches you can feel have gone past the finish. A screen and recoat might handle those; a full sand usually does.
  • Cupboards, gaps, or squeaks that have gotten worse. Cupping or widening gaps can point to moisture getting into the floor. Refinishing after the cause is sorted out restores the surface, but the moisture problem comes first.
  • Dullness that won’t come back with cleaning. If mopping and a gentle cleaner no longer bring up a sheen, the topcoat is spent. Buffing or a recoat is usually enough at that stage.
  • You’re remodeling the room and the floor is the weak point. New cabinets or paint will make a tired floor look worse. Refinishing during a refresh costs less than pulling the floor out and starting over.

Our Hardwood Floor Refinishing Process – Step by Step

  1. 1
    Free in-home measure and estimate. We walk the floor with you, check the thickness of the wood and the condition of the finish, and talk about what you want the color to be. You get a written price before we schedule anything. No obligation.
  2. 2
    Preparation and protection. We move what needs moving, protect adjacent surfaces, and set up dust containment. Then we go over the floor for nail heads, loose boards, and gaps that need attention before sanding begins.
  3. 3
    Sanding. We sand through a sequence of grits to strip the old finish and level the wood. We check the surface as we go, because how much can come off depends on the thickness of your floor and we don’t take chances with it.
  4. 4
    Stain and finish. If you’re changing color, we apply the stain and let you see it in your own light. Then we build up the finish coats, which is where the sheen and protection come from.
  5. 5
    Final walkthrough. We walk the finished floor with you, go over care instructions, and confirm you’re happy before we call the job done.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Hardwood Floor Refinishing Cost in Henderson?

A typical hardwood floor refinishing job in Henderson runs $1675 – $4650 for a 500 to 800 square foot project, materials and labor included. Refinishing starts from about $3 per square foot, and the price per square foot depends on the product, the room, and the subfloor, so the written estimate always sets the final price.

What moves the number up or down: the size of the space, how much finish has to come off, whether you’re changing color with stain, how many coats the finish needs, and whether stairs are part of the job. A screen and recoat costs less than a full sand because it skips the deep passes. A floor with water damage or boards that need replacing costs more, because the repair comes before the refinish.

To avoid overpaying, ask for a written estimate that breaks out sanding, staining, finish coats, and stairs separately. That way you can see exactly what you’re being charged for and drop anything you don’t need. Our estimates are free and there’s no obligation attached, so you can get a real number before you commit.

Hardwood Floor Refinishing Near Henderson – Our Service Area

We provide hardwood floor refinishing in Henderson and the surrounding valley, including Boulder City, Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, Spring Valley, Summerlin, North Las Vegas, Las Vegas, and Sandy Valley. Scheduling depends on where you are and what the job involves, so we set the date at the estimate. If you’re not sure whether you’re in our area, call and we’ll tell you straight.

Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Hardwood Floor Refinishing in Henderson

Schedule Your Hardwood Floor Refinishing Service in Henderson Today

Refinishing is the practical way to save a tired hardwood floor and skip a full replacement. Our estimates are free, our prices are written before any work begins, and our technicians have up to 10 years of experience with wood floors in this valley. Call (844) 972-2185 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Start at Floors Henderson or see what we do in Henderson, and let’s get your floor looking right again.

Written by the team at Floors Henderson.

Why Henderson Chooses Floors Henderson

We set the standard for hardwood floor refinishing in Henderson.

Free Written Estimates

We inspect the job across Henderson and give you the price in writing before anything starts.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Henderson

Getting your hardwood floor refinishing project started is simple.

1

Call or Request a Free Estimate

Tell us about your hardwood floor refinishing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local hardwood floor refinishing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Henderson Customers Say

Trusted by homeowners across Henderson and surrounding areas.

★★★★★

"Vinyl plank across the whole downstairs, around the stair landing and under the door casings. The cuts at the doorways are tidy and nothing looks like it was forced."

Colleen Fletcher
★★★★★

"Sanded and refinished the hardwood in our hallway and two bedrooms. The dust control was better than I expected, and the grey traffic path by the front door is gone."

Paul Delaney
★★★★★

"Staggered the plank ends properly so there is no stair-step pattern across the room, and the last row along the wall is not a thin sliver."

Jennifer Thompson

Ready for Hardwood Floor Refinishing in Henderson?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Henderson.

(844) 972-2185

Request a Free Estimate in Henderson

Tell us about your hardwood floor refinishing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Local Service Coverage
Call Now - We Answer 24/7