Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Henderson Homeowners
If your wood floors have gone gray along the traffic paths, show dents under the dining chairs, or carry a finish that scuffs every time you move furniture, you don’t need new floors. You need them refinished. Hardwood floor refinishing in Henderson typically runs $1675 – $4650 for a 500 to 800 square foot project, and that price restores the wood you already have instead of covering it up. Our technicians have up to 10 years of experience with sanding, staining, and recoating, and they work on solid and engineered hardwood alike. We start every job with a free in-home measure and estimate, so you get a written price before anything gets booked. Call (844) 972-2185. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Refinishing costs far less than replacement because you keep the existing wood.
- Typical estimated range in Henderson is $1675 – $4650 for a 500 to 800 square foot project.
- Refinishing starts from about $3 per square foot; the written estimate sets the final price.
- Not every floor can be sanded down again, so we check wood thickness and condition at the estimate visit.
What Our Hardwood Floor Refinishing Service Includes
Refinishing covers a lot of ground, and the right approach depends on what your floor looks like and how much finish is left on it. Here’s what each part of the service involves and when it makes sense.
Hardwood Floor Sanding
Sanding removes the old finish and levels the surface of the wood so a new coat bonds evenly. You need it when the finish is worn through in spots, when there are deep scratches, or when the floor has been recoated so many times that a new coat won’t sit right. We use dust-controlled sanding equipment and work through progressively finer passes so the grain comes up clean and ready. How far down we can sand depends on the thickness of the wood, and we check that at the estimate before promising anything.

Hardwood Floor Staining
Staining changes the color of the wood, either to refresh a faded floor or to shift the tone toward something that fits a room’s design. You’d ask for it when your floor is orange-toned and you want something cooler, or when sanding has left the wood looking paler than the rest of the house. We apply stain samples on your actual floor so you can see the color in your own light, and we talk through how your wood species takes stain before committing. Final color depends on the wood itself; a sample shows you what to expect, not a guaranteed match.

Hardwood Floor Restoration
Restoration is for floors that need more than a fresh coat: water-damaged boards, gaps between planks, squeaks, or wood that has cupped over time. You want it when the floor still has life in it but isn’t just scuffed. We assess the damage at the estimate and explain what refinishing can fix and what needs board replacement first. Restoring what you have is often the more sensible move than tearing out original wood that has real character.

Hardwood Floor Buffing
Buffing is a light surface treatment that scuffs up the top layer of finish to remove dullness and minor marks. It’s a good fit when the finish is intact but looks tired, and you don’t want to sand the whole floor. We screen the surface and apply a fresh coat so the floor reads cleaner without a full refinish. It’s a smaller job, and it’s priced smaller too.
Screen and Recoat Hardwood Floors
A screen and recoat is the middle ground between a buff and a full sand: we lightly abrade the finish, clean the floor, and apply a new topcoat. You’d want it when the finish is intact but scratched on the surface and the wood underneath hasn’t gone bare. It adds a protective layer back onto the floor without going down to raw wood. Not every finish can be recoated this way, so we check what’s on the floor at the estimate.
Stair Refinishing
Stairs take more wear than any floor in the house, and they need to match whatever happens on the floor above and below. You need stair refinishing when treads are worn down the middle or the finish is chipping at the edges. We sand and refinish treads, risers, and handrails together with the floor so the whole run reads as one continuous piece. Stair work is a separate line on the estimate because the labor is different from a flat floor.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
Most homeowners don’t know what brand of flooring is on their floor; a lot of the wood in Henderson homes came with the house. That’s fine with us. We install and service the floor you choose, and we refinish solid and engineered wood regardless of who manufactured it. With Shaw and Mohawk lines, the engineered and solid products are widely used across the valley, and we know how the wear layers and finishes on those panels respond to sanding versus a screen and recoat. Getting that call right protects the floor rather than burning through it.
We also work on COREtec and Pergo products when a customer is pairing a refinish in one room with a new floor in another, and we’re glad to talk through how a refinish upstairs will sit next to a new surface downstairs. Whether you have Shaw, Mohawk, or any other make, we can help – the first step is a free estimate where we look at the actual floor and tell you what it will take.
Signs You Need Hardwood Floor Refinishing Right Now
- Gray or worn traffic paths. The finish has rubbed off where you walk most, and bare wood is showing through. Once the wood itself is exposed to foot traffic, it picks up dirt and scratches faster, so the sooner it’s refinished the less wood you lose.
- Deep scratches that catch a fingernail. Surface marks are cosmetic, but scratches you can feel have gone past the finish. A screen and recoat might handle those; a full sand usually does.
- Cupboards, gaps, or squeaks that have gotten worse. Cupping or widening gaps can point to moisture getting into the floor. Refinishing after the cause is sorted out restores the surface, but the moisture problem comes first.
- Dullness that won’t come back with cleaning. If mopping and a gentle cleaner no longer bring up a sheen, the topcoat is spent. Buffing or a recoat is usually enough at that stage.
- You’re remodeling the room and the floor is the weak point. New cabinets or paint will make a tired floor look worse. Refinishing during a refresh costs less than pulling the floor out and starting over.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and estimate. We walk the floor with you, check the thickness of the wood and the condition of the finish, and talk about what you want the color to be. You get a written price before we schedule anything. No obligation.
- 2
Preparation and protection. We move what needs moving, protect adjacent surfaces, and set up dust containment. Then we go over the floor for nail heads, loose boards, and gaps that need attention before sanding begins.
- 3
Sanding. We sand through a sequence of grits to strip the old finish and level the wood. We check the surface as we go, because how much can come off depends on the thickness of your floor and we don’t take chances with it.
- 4
Stain and finish. If you’re changing color, we apply the stain and let you see it in your own light. Then we build up the finish coats, which is where the sheen and protection come from.
- 5
Final walkthrough. We walk the finished floor with you, go over care instructions, and confirm you’re happy before we call the job done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Henderson?
A typical hardwood floor refinishing job in Henderson runs $1675 – $4650 for a 500 to 800 square foot project, materials and labor included. Refinishing starts from about $3 per square foot, and the price per square foot depends on the product, the room, and the subfloor, so the written estimate always sets the final price.
What moves the number up or down: the size of the space, how much finish has to come off, whether you’re changing color with stain, how many coats the finish needs, and whether stairs are part of the job. A screen and recoat costs less than a full sand because it skips the deep passes. A floor with water damage or boards that need replacing costs more, because the repair comes before the refinish.
To avoid overpaying, ask for a written estimate that breaks out sanding, staining, finish coats, and stairs separately. That way you can see exactly what you’re being charged for and drop anything you don’t need. Our estimates are free and there’s no obligation attached, so you can get a real number before you commit.
Hardwood Floor Refinishing Near Henderson – Our Service Area
We provide hardwood floor refinishing in Henderson and the surrounding valley, including Boulder City, Whitney, Paradise, Winchester, Enterprise, Sunrise Manor, Spring Valley, Summerlin, North Las Vegas, Las Vegas, and Sandy Valley. Scheduling depends on where you are and what the job involves, so we set the date at the estimate. If you’re not sure whether you’re in our area, call and we’ll tell you straight.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Henderson
Hardwood floor refinishing is the process of sanding off the old finish and surface layer of the wood and applying a new stain and protective finish. It restores the look of an existing floor without replacing it. For homeowners, that means keeping the original wood and character of the house rather than tearing it out. Whether your floor can be refinished depends on the thickness of the wood and its condition, which we check at the estimate.
The schedule depends on the size of the space, how the floor reacts to sanding, and how many finish coats it needs. We set the timeline at the estimate so you know what to plan around, and we confirm the install day before we start. We don’t promise a fixed number of days before we’ve seen the floor in person. Call (844) 972-2185 for an estimate and a realistic schedule.
Typical estimated pricing in Henderson is $1675 – $4650 for a 500 to 800 square foot project, and refinishing starts from about $3 per square foot. Final price depends on size, condition, stain choice, and whether stairs are included. The written estimate sets the final price, and it’s free with no obligation. Call (844) 972-2185 for an exact quote.
Yes, we refinish and service hardwood floors from Shaw, Mohawk, and other major brands. We install and service the floor you choose, and we work on solid and engineered wood alike. What matters most is the thickness and condition of the floor, not the label on the box. Call (844) 972-2185 to book a free in-home estimate.
Same-day service is possible depending on what’s on the schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call then is booked into the next opening. Refinishing itself is a scheduled job: free measure, written estimate, then a booked install day. Call (844) 972-2185 to get started.
We stand behind the work we do, and the written estimate spells out what’s covered. Because the lifespan of a refinish depends partly on care and conditions in the home, we go over the details with you before the job starts. We don’t invent warranty terms we can’t put in writing. Call (844) 972-2185 with questions about your specific floor.
Clear the room of furniture, breakables, and anything hanging on the walls before we arrive. Plan to stay off the floor for the finish cure time, which depends on the product and the home and is confirmed at the estimate. Arrange a spot for pets away from the work area. We walk through the rest at the measure visit so nothing catches you by surprise.
Schedule Your Hardwood Floor Refinishing Service in Henderson Today
Refinishing is the practical way to save a tired hardwood floor and skip a full replacement. Our estimates are free, our prices are written before any work begins, and our technicians have up to 10 years of experience with wood floors in this valley. Call (844) 972-2185 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Start at Floors Henderson or see what we do in Henderson, and let’s get your floor looking right again.
Written by the team at Floors Henderson.